Caldwell Lifting Beams are structurally able to handle the load through the beam spread allowing for lower headroom designs.
CLICK HERE TO SEE THE COMPLETE CALDWELL PRODUCT LINE
NEW – Bail Style Triangle Beam
Caldwell Triangle Beams provide a low headroom solution when a short span is all you need to make the connections between the load and the crane. Caldwell Triangle Beams are available in standard capacities from 13 to 149 tons and comply with ASME standards.
Caldwell Lifting Beams Product Features:
- Low Headroom
- Designed to ASME standards
Available Options:
- Custom Capacities
- Extra Spreads
- Full Capacity Center Lift Points
- Built-In Stand
- Oblong with Top Shackle
- Longer Spreads
- Shorter Spreads
- Various Rigging Options
NEW – Shackle Style Triangle Beams
Caldwell Triangle Beams provide a low headroom solution when a short span is all you need to make the connections between the load and the crane. Caldwell Triangle Beams are available in standard capacities from 13 to 149 tons and comply with ASME standards.
Caldwell Lifting Beams Product Features:
- Low Headroom
- Designed to ASME standards
Available Options:
- Custom Capacities
- Extra Spreads
- Full Capacity Center Lift Points
- Built-In Stand
- Oblong with Top Shackle
- Longer Spreads
- Shorter Spreads
- Various Rigging Options
Multi-Spread Beam – NEW SIZES!
NEW – Expanded sizes. We now offer standard sizes in spreads up to 42′
Our model 20H Low Headroom Multi-Spread Lifting Beams are the ideal solution for handling loads of various sizes.
Caldwell Lifting Beams Product Features:
- ‘I’ beam construction.
- Three spreads to adjust to the load- Outside spread- Middle spread (outside less 1’)- Inside spread (outside less 2’).
- Swivel hooks with hook latches standard.
- Wide range of sizes and capacities available.
- Complies with ASME standards.
PRODUCT OPTIONS:
- OPTION A: Extra Holes of Different Placement of Holes – Allows multiple hook positioning beyond standard 3 spreads. Specify number and spread(s) required.
- OPTION B: Extra Shackles and Swivel Hooks – Allows for multiple pick points or eliminated the need to move hardware for different size loads.
- OPTION C: Built In Stand – Keeps beam upright for easy crane hook attachment (pictured above).
Adjustable Lifting Beam
Versatile beam had adjustable spreaders and lifting bail standard to allow for handling of a wide range of loads with a single lifting beam. Product can be used with provided shackles or add optional hooks for increased versatilitiy.
Caldwell Lifting Beams Product Features:
-
Bail adjusts horizontally for lifting unbalanced loads.
-
Provides clearance in low headroom applications.
-
Spread adjusts in 6” increments along lifting beam.
-
Shackles included.
-
Optional swivel hooks available.
-
Complies with ASME standards.
Product Options:
-
OPTION S- Pair of swivel hooks
Adj. Lifting/Spreader Beam
Adjustable bail, adjustable spreads, and the option to add top rigging for additional stability, this is a versatile lifting / spreader beam.
Caldwell Lifting Beams Product Features:
- Has adjustable lifting points.
- Can handle both wide and unbalanced loads.
- Low headroom capability.
- Shackles included.
- Converts to spreader beam with addition of top rigging.
- Optional swivel hooks available.
- Optional chain top rigging available.
- Complies with ASME standards.
PRODUCT OPTIONS:
- OPTION S- Pair of swivel hooks
- OPTION C- Chain top rigging
- Cross beams (one or two) specify spread(s), contact Caldwell Applications.
Fixed Twin Basket Sling
The Model 18 – Fixed Twin Basket Sling Lifting Beam is the ideal solutions as a dedicated lifting beam when handling loads with lifting slings in a basket hitch. “Bull Horn” style hooks set on top of a lifting beam, helping to reduce the overall headroom required for this type of lifting beam.
Caldwell Lifting Beams Product Features:
- Designed to be used with slings in a basket hitch.
- Provides greatest clearance in low headroom applications.
- Two sets of bent bar hooks are standard on units with a spread of 6’ and greater.
- Spread 2 is 1/2 of spread 1.
- Hooks are designed to handle up to a 2” sling eye width.
- Complies with ASME standards.
Fixed Spread
The Caldwell Fixed Spread Lifting Beam is a light weight solution for handling load of the same size.
Caldwell Lifting Beams Product Features:
- Provides clearance in low headroom applications.
- Eye hooks with hook latches standard.
- Fixed spread.
- Complies with ASME standards.
Low Headroom Multi-Spread
The low headroom solution with multiple spreads for the flexibility to handle a wider range of load sizes.
Caldwell Lifting Beams Product Features:
- Beams over 4’ have 3 spreads. Outside spread, Outside less 1’, Outside less 2’.
- 3’ & 4’ beams have 2 spreads.
- Swivel hooks with hook latches standard.
- Standard capacities to 40 tons, larger capacities and configurations available.
- Complies with ASME standards.
PRODUCT OPTIONS:
- OPTION A: Extra Holes or Different Placement of Holes – Allows multiple hook positioning beyond standard 3 spreads. Specify number and spread(s) required.
- OPTION B: Faspins – For ease of positioning hooks with quick release. Specify number required.
- OPTION C: Extra Hooks – Allows for multiple pick points. Specify number required.
- OPTION D: Pin Type Bail – Lifting pin located between structural channel. (Hoist hook information must be supplied.)
- OPTION E: Shackle Lug – Lifting lug with shackle (Headroom may change.)
High-Capacity
Heavy-duty design and construction provide solutions in standard sizes for those demanding large capacity applications.
Caldwell Lifting Beams Product Features:
- Heavy duty ‘I’ beam construction.
- Built in beam stands for easy storage.
- Pin bail to allow for quick attachment of large crane hook.
- Beams have three spreads for flexibility.
- Lifting shackles are standard.
- Complies with ASME standards.
PRODUCT OPTIONS:
- Extra Holes or Different Placement of Holes
Heavy Duty Twin Basket Sling
Use with lifting slings for handling loads in a basket hitch. Large hooks help increase ease of use with lifting slings.
Caldwell Lifting Beams Product Features:
- Designed to be used with slings in a basket hitch.
- Specially designed hooks with hook latches minimize potential sling damage.
- Two sets of fixed hooks are standard in all lengths over 4’.
- The inner set of hooks (S2) are 1/2 the overall spread.
- Extra spreads available upon request.
- Complies with ASME standards.
PRODUCT OPTIONS:
- Additional or different placement of lifting hooks.
- Lifting Slings
- Model 22G – For lifting sheets or packages of glass. (Specilized Lifting Slings will be required.)
Twin Hoist Lifting Beam
Designed to connect two seperate cranes to create lifing point(s) between the two seperate cranes.
Caldwell Lifting Beams Product Features:
- Use two or more hoists to increase lifting stability.
- Swivel hook with hook latch.
- Several options are available for added versatility.
- Complies with ASME standards.
PRODUCT OPTIONS:
- OPTION A – Off-set hook for hoistsof different capacities.
- OPTION B – Multiple load hooks, some outside the bail span.
- OPTION C – Center bail and extra pair of hooks for maximum versatility
Adjustable Bail Lifting Beam
Adjust lifting bail to be positioned over the load center gravity before lifting the load.
Caldwell Lifting Beams Product Features:
- Handles off center loads by adjusting the bail before a lift.
- Adjustable spread options available.
- Swivel hooks with hook latches standard.
- Wide range of sizes and capacities available.
- Complies with ASME standards.
PRODUCT OPTIONS:
- OPTION A – EXTRA HOLES – Allows for multiple hookpositioning. Specify numberand spread(s) required.
- OPTION B – FASPINS – For ease of positioning hooks with quick release.Specify number of faspins required.
- OPTION C – EXTRA HOOKS – Allows for multiple pick points. Specify number of hooks required.
- OPTION D – LOWER HEADROOM – Lifting pin located betweenstructural channel. (Hoist hook information must be supplied.)
Load Leveler
Use chain wheel to adjust lifting bail to be positioned over the load center of gravity before lifting the load.
Product Features:
- Handles off center loads by adjusting the bail before a lift.
- Infinite adjustment of bail within range.
- Swivel hooks with hook latches standard.
- Wide range of sizes and capacities available.
- Complies with ASME standards.
PRODUCT OPTIONS:
- OPTION A – EXTRA HOLES – Allows for multiple hook positioning. Specify number and spread(s) required.*Could increase headroom.
- OPTION B – FASPINS – For ease of positioning hooks with quick release. Specify numberof faspins required.
- OPTION C – EXTRA HOOKS – Allows for multiple pick points.Specify number of hooks required.
- MOTORIZED ADJUSTMENT Please see our Posi-Leveler™
Posi-Leveler™ Motorized Load Leveler
The Posi-Leveler™allows for motorized adjustment of the beams central lifting point during the lift to always maintain a balanced load. This feature can be used for fine adjustment of the center of gravity during the lift. Leveling uneven loads during the lift saves rigging time and promotes a safer work
Product Features:
- Motorized Posi-Leveler™ adjusts to the center of gravity during lift.
- Swivel hooks with hook latches are standard.
- Custom sizes are available.
- Push button pendent control with radio control option.
- Standard bail adjustment 6″ each side of center, with optional 12″ adjustment each side of center available.
- Complies with ASME standards.
IDEAL FOR:
- Bundles
- Odd or irregular shaped loads
- Weldments
- Paper roll handling
- Sheet handling
Bulk Container
Designed specifically for handling bulk containers with nylon loops in each corner.
Product Features:
- Constructed of tubing for smooth surface with no sharp edges.
- Low headroom design.
- Easily attach to load with open lifting lugs.
- Lug spacing will hold up to a 3” wide loop.
- Oversized lifting eye to accept a wide range of hooks.
- Complies with ASME standards.
Standard Adj. Four Point
These standard configurations cover a wide range of requirement for many multi-point lifting applications.
Product Features:
- Low headroom design.
- Swivel hooks with latches standard.
- Adjustable spreads on 1′ increments.
- Faspins for easy crossarm adjustment.
- Complies with ASME standards.
Four Point Beam
This low headroom lifting beam handles large loads using multiple pick points. Each unit is custom designed for your specific application. Complies with ASME standards.
Fill out our application evaluation form below for a quote on your specific application.
OPTION A – Multiple Bails: Use 2 or 4 hoists to increase lifting stability.
OPTION B – Adjustable Bail: Is used when load-leveling capability is required along length of load.
OPTION C – Adjustable Spread: Use when adjustability in length and width is required.
Three Point Beam
This low headroom lifting beam handles large loads using multiple pick points. Each unit is custom designed for your specific application. Complies with ASME standards.
Fill out our application evaluation form below for a quote on your specific application.
OPTION A MULTIPLE BAILS – Use 2 hoists to increase lifting stability.
OPTION B ADJUSTABLE BAIL – Is used when load-leveling capability is required along length of load.
OPTION C ADJUSTABLE SPREAD – Use when adjustability in length and width is required.
Twin Hoist Rotating Beam
A specially designed lifting and rotating beam using two cranes or two hoists to horizontally rotate a load. A position locking pin holds the load rotation at a designated position. Available with motorized rotation.
Product Features:
- Wide range of sizes and capacities available.
- Maximum 20 feet (upper and lower) beam length.
- Complies with ASME standards.
PRODUCT OPTIONS:
- OPTION A – TWIN HOOKS: Used in conjunction with basket hitch slings.
- OPTION B – J HOOKS: Generally required to lift paper rolls or similar application. (See our Roll Lifting Beams)
- OPTION C – MOTORIZED ROTATION: Allows remote positioning of a load.
- OPTION D – LOWER HEADROOM BAILS: Utilized when headroom must be held to a minimum. Crane hook data must be supplied.
Chlorine Cylinder Beam
Designed to efficiently handle standard chlorine gas cylinders. Standard size determined by the Chlorine Institute is 80-3/4” to 82-1/4” in length. Special low headroom modification is available.
