Gym & Wrestling Room Wall Pads – set up an on-site consultation today
Gym & wrestling room wall pads in Standard Polyurethane & Neoprene Class A Fire Rated Wall Pads that meet NFPA 286, including custom wall pads, corner pads, stage pads and more.
All pads available with 1″ nailing lip, no lip Z-Clip mounting or Velcro attachment. Vinyl available in white, yellow, orange, red, kelly green, forest green, royal blue, marine blue, navy blue, gray, black, maroon, beige, teal and purple.
[ezcol_2third]
Standard Polyurethane Wall Pads
These gym & wrestling room wall pads provide the ultimate protection against minor impact or contact with walls, beams, or columns. Pads are a must behind basketball backstops.
Standard size pads are 6′ x 2′ with 1″ nailing margin on top and bottom of each panel. Nailing margin reduces foam height from 6’ to 5’-10″. Pads are constructed using 2″ thick 3.5-lbs. density polyurethane foam cemented to 7/16″ oriented strand board. Cover material is 14-ounce polyester laminated vinyl stapled to backing every two inches. Vinyl is flame retardant material, which meets NFPA 701, ASTM E84, and CSFM (California State Fire Marshall).
[/ezcol_2third]
[ezcol_1third_end]
[/ezcol_1third_end]
[ezcol_2third]
NFPA 286 Class A Fire Rated Wall Pads
Gym & wrestling room wall pads with Class A fire rating are constructed using 2” thick CR SafGuard medium fire read more retardant neoprene foam and meeting NFPA 286 & ASTM E84 with a Class A rating meeting Flame-Spread Index of 25 or less, and Smoke Development index of 450 or less. Foam is cemented to 7/16” oriented strand board. Cover material is 14-ounce polyester laminated vinyl attached to backing with staples every two inches. Meeting NFPA 286 & ASTM 84, with a Class A rating.
[/ezcol_2third]
[ezcol_1third_end]
[/ezcol_1third_end]
[ezcol_2third]
Z Clip Wall Attachment Kit
Provides a convenient and neat alternative for attachment of wood backed wall pads without nailing lips for gym & wrestling room wall pads . This system results in no exposed screws or bolts, and damaged or worn wall pads can be easily replaced. Z-clip at the top and bottom of the pad are secured to the wall with an appropriate attachment method as dictated by building conditions. A second z-clip attached to the back of the wall pad (top and bottom) securely locks the pad in place. Comes in 6 foot lengths, but may be cut to length as required by installer. Requires drilling in the field. May be used with wall padding, corner pads, and square column pads.
[/ezcol_2third]
[ezcol_1third_end]
[/ezcol_1third_end]
[ezcol_1half]
Custom Digital Graphics
Available on all vinyl wall pad products. A great addition to all gym & wrestling room wall pads
[/ezcol_1half]
[ezcol_1half_end]
[/ezcol_1half_end]
Recent Projects
[ezcol_1half]
[/ezcol_1half]
[ezcol_1half_end]
[/ezcol_1half_end]
[ezcol_1half]
[/ezcol_1half]
[ezcol_1half_end]
[/ezcol_1half_end]
[ezcol_1half]
[/ezcol_1half]
[ezcol_1half_end]
[/ezcol_1half_end]
[ezcol_1half]
[/ezcol_1half]
[ezcol_1half_end]
[/ezcol_1half_end]
[ezcol_1half]
[/ezcol_1half]
[ezcol_1half_end]
[/ezcol_1half_end]
