Terrier Vertical Lifting Clamps
Terrier vertical lifting clamps are especially designed for lifting (stainless) steel sheets, profiles or structures in a straight up direction. Terrier’s safety plate lifting clamps derive their name from the built-in safety mechanism, which consists of a locking device, a tension spring and a lever. Once the lever has been operated, the safety mechanism provides constant pre-tensioning of the cam on the steel-plate, thereby ensuring that the clamp does not slip when lifting force is applied. When a load is being lifted the clamping force on the cam is increased by the weight of the load.
ALSO SEE HORIZONTAL LIFTING CLAMPS, CLICK HERE TO SEE THEM
[ezcol_1third]
[/ezcol_1third] [ezcol_2third_end]
TS / TSE / STS
Terrier Vertical Lifting Clamps
Best selling lightweight heavy duty vertical lifting clamp
Application:
- For Vertical lifting, transporting and turning of all steel plates and structures.
- Jaw openings available from: 0 to 150 mm.
- TSE / STS types are supplied with enlarged jaw opening.
- Working load limit (WLL) 750 – 30000kg (Higher WLL available upon request).
- Min.WLL is 10% of max. WLL.
Features and benefits:
- Lightweight design for easy handling.
- Tough quality heavy duty welded shell body.
- Always equipped with a safety mechanism, ensuring the clamp does not slip when lifting force is applied and when load is being lowered.
- Clamp is locked in closed as well as open position.
- Maintenance-friendly, easy to exchange parts which are available upon request .
- Signal colouring on lifting eye and locking lever for extra safety.
[/ezcol_2third_end]
[ezcol_1third]
[/ezcol_1third] [ezcol_2third_end]
TSU / TSEU / STSU
Terrier Vertical Lifting Clamps
Best selling lightweight heavy duty clamp for universal lifting
Application:
- For vertical lifting, transporting and turning of all steel plates and structures from all positions
- Jaw openings available from: 0 to 150 mm
- TSEU / STSU types are supplied with enlarged jaw opening
- Working load limit (WLL) 750 – 30000kg (Higher WLL available upon request)
- Min . WLL is 10% of max . WLL
- note: the plate surface of the material must have a hardness level of max. HrC 37/345 Hb
Features and benefits:
- With articulated lifting shackle for universal lifting flexibility at various angles
- The articulated lifting shackle guarantees a pressure grip in every position, even when side loading up to 90 degrees . Note a lower load capacity when lifting in an angle higher than 45 degrees . Please check the WLL reduction below
- Longer plates can be lifted without the use of a spreader beam when using two clamps on a two legged chain sling
- Always equipped with a safety mechanism, ensuring the clamp does not slip when VertiCal lifting lifting force is applied and when load is being lowered
- Clamp is locked in closed as well as open position
- Lightweight, maintenance-friendly, heavy duty body
[/ezcol_2third_end]
[ezcol_1third]
[/ezcol_1third] [ezcol_2third_end]
TSMP / TSEMP / STSMP
Terrier Vertical Lifting Clamps
three way articulated linkage arrangement for flexible lifting and extended reach
Application:
- For vertical lifting, transporting and turning of all steel plates and structures
- Jaw openings available from: 0 to 100 mm
- TSEMP / STSMP types are supplied with enlarged jaw opening
- Working load limit (WLL) 750 – 9000kg (Higher WLL available upon request)
- Min . WLL is 10% of max . WLL
- note: the plate surface of the material must have a hardness level of max. HrC 37/345 Hb
Features and benefits:
- With three way articulated linkage arrangement lifting shackle
- Enjoy all the benefits of the TS clamps with extra reach and lifting flexibility
- When attached to a fixed load bearing arm (e .g . spreader bar) the clamp will retain its
- flexibility and no chain is needed
- Due to length of the three way linkage arrangement the clamp can be lowered further
- between standing plates or structures
- Always equipped with a safety mechanism, ensuring the clamp does not slip when
- lifting force is applied and when load is being lowered
- Clamp is locked in closed as well as open position
- Lightweight design for easy handling
- Tough quality heavy duty welded shell body
- Maintenance-friendly, easy to exchange parts which are available upon request
[/ezcol_2third_end]
[ezcol_1third]
[/ezcol_1third] [ezcol_2third_end]
TJP / TJPU
Terrier Vertical Lifting Clamps
Designed for (thin) sheet metal lifting without minimum Wll
Application:
- For vertical lifting and transporting of (thin) sheet metal
- Jaw openings available from: 0 to 20 mm
- Working load limit (WLL) 250 – 1000kg .
- No min . WLL
- note: the plate surface of the material must have a hardness level of max. HrC 37/345 Hb
Features and benefits:
- Equipped with a special pivot which will adapt itself to the load of the clamp generating extra friction, eliminating the chance of slipping loads
- TJPU comes with an articulated lifting shackle for universal lifting flexibility at various angles
- TJP comes with a standard lifting shackle
- Standard equipped with a safety mechanism, ensuring the clamp does not VertiCal lifting slip when lifting force is applied and when load is being lowered
- The clamp is locked in closed as well as in open position
- Lightweight design for easy handling
- Tough quality heavy duty welded shell body
- Maintenance-friendly, easy to exchange parts which are available upon request
[/ezcol_2third_end]
[ezcol_1third]
.
[/ezcol_1third] [ezcol_2third_end]
TSHP / TSHP-A
Terrier Vertical Lifting Clamps
Lightweight clamp with extra large jaw opening
Application:
- For vertical lifting, handling and transporting of Holland Profile (HP) shipbuilding structures, steel plates and structures
- • Turning lathe clamp
- • TSHP jaw opening from 0 to 80 mm
- TSHP-A adjustable jaw opening available from: 0 to 155 mm
- TSHP / TSHP-A Working load limit (WLL) 1000 – 1500kg
- Higher WLL available upon request . Min . WLL is 10% of max . WLL
- Lifting of longer sections should be done with a spreader beam
- note: the plate surface of the material must have a hardness level of max. HrC 37/345 Hb
Features and benefits:
- Also useful as a “big-jaw” opening clamp
- • Standard with 3 pivots for extra powerful clamping force
- • Easy handling of workpieces in and out of lathe due to extra small W-dimensions (see illustration)
- • Lightweight design for easy handling
- Tough quality heavy duty welded shell body
- Always equipped with a safety mechanism, ensuring the clamp does not slip when lifting force is applied and when load is being lowered
- Clamp is locked in closed as well as open position
- Maintenance-friendly, easy to exchange parts which are available upon request
[/ezcol_2third_end]
[ezcol_1third]
[/ezcol_1third] [ezcol_2third_end]
TSHPU
Terrier Vertical Lifting Clamps
lightweight Holland profile (Hp) clamp for universal lifting
Application:
- For vertical lifting, handling and transporting of Holland Profile (HP) shipbuilding structures from all positions
- Jaw openings available from: 0 to 45 mm
- Working load limit (WLL) 3000 – 5000kg
- Higher WLL available upon request . Min . WLL is 10% of max . WLL
- Lifting of longer sections should be done with a spreader beam
- note: the plate surface of the material must have a hardness level of max. HrC 37/345 Hb
Features and benefits:
- With articulated lifting shackle for universal lifting flexibility at various angles
- The articulated lifting shackle guarantees a pressure grip in every position, even when side loading up to 90 degrees . Note a lower load capacity when lifting in an angle higher than 45 degrees . Please check the WLL reduction below
- Standard with 2 pivots for extra powerful clamping force
- Always equipped with a safety mechanism, ensuring the clamp does not slip when lifting force is applied VertiCal lifting and when load is being lowered
- Clamp is locked in closed as well as open position
- Lightweight design for easy handling
- Tough quality heavy duty welded shell body
- Maintenance-friendly, easy to exchange parts which are available upon request
[/ezcol_2third_end]
[ezcol_1third]
[/ezcol_1third] [ezcol_2third_end]
TCK
Terrier Vertical Lifting Clamps
safe and easy square tube frame lifting
Application:
- For vertical lifting and transporting of structures where a square tube is used as a frame, e .g . mobile units etc . If the clamp is being loaded, the cams will pull out sideways and will grip into the sides of the square tube
- Jaw openings available from: 62 to 70 mm
- Working load limit (WLL) 3000kg
- Min . WLL is 10% of max . WLL
- note: the plate surface of the material must have a hardness level of max. HrC 37/345 Hb
Features and benefits:
- Because of the compact design of the clamp, the clamp will not use more space than the dimensions of the square tube
- Equipped with articulated lifting shackle for extra lifting flexibility (max 30o)
- Standard with 2 high grip pivots for extra powerful clamping force
- Special locking devise ensuring safe and easy handling
- Lightweight design for easy handling
[/ezcol_2third_end]
[ezcol_1third]
[/ezcol_1third] [ezcol_2third_end]
TSHPU
Terrier Vertical Lifting Clamps
lightweight Holland profile (Hp) clamp for universal lifting
Application:
- For vertical lifting, handling and transporting of Holland Profile (HP) shipbuilding structures from all positions
- Jaw openings available from: 0 to 45 mm
- Working load limit (WLL) 3000 – 5000kg
- Higher WLL available upon request . Min . WLL is 10% of max . WLL
- Lifting of longer sections should be done with a spreader beam
- note: the plate surface of the material must have a hardness level of max. HrC 37/345 Hb
Features and benefits:
- With articulated lifting shackle for universal lifting flexibility at various angles
- The articulated lifting shackle guarantees a pressure grip in every position, even when side loading up to 90 degrees . Note a lower load capacity when lifting in an angle higher than 45 degrees . Please check the WLL reduction below
- Standard with 2 pivots for extra powerful clamping force
- Always equipped with a safety mechanism, ensuring the clamp does not slip when lifting force is applied VertiCal lifting and when load is being lowered
- Clamp is locked in closed as well as open position
- Lightweight design for easy handling
- Tough quality heavy duty welded shell body
- Maintenance-friendly, easy to exchange parts which are available upon request
[/ezcol_2third_end]
[ezcol_1third]
[/ezcol_1third] [ezcol_2third_end]
TSEU-A
Terrier Vertical Lifting Clamps
Universal heavy duty clamp with adjustable extra large jaw opening
Application:
- For vertical lifting, transporting and turning of all steel plates and structures from all positions
- Adjustable Jaw opening from: 0 to 95 mm
- 3 different jaw positions . Adjustable by steps of 30 mm
- Working load limit (WLL) 3000kg . Min . WLL is 10% of max . WLL
- note: the plate surface of the material must have a hardness level of max. HrC 37/345 Hb
Features and benefits:
- Only 1 clamp needed for different kind of jobs
- Also the same clamp can be used if a big jaw opening is necessary
- With articulated lifting shackle for universal lifting flexiblity at various angles
- The articulated lifting shackle guarantees a pressure grip in every position, even when side loading up to 90 degrees .
- Note a lower load capacity when lifting in an angle higher than 45 degrees . Please check the WLL reduction.
- Longer plates can be lifted without the use of a spreader beam when using two clamps on a two legged chain sling
- Always equipped with a safety mechanism, ensuring the clamp does not slip when lifting force is applied and when load is being lowered
- Standard with 2 pivots for extra clamping force
- Clamp is locked in closed as well as open position
- Lightweight design for easy handling
- Tough quality heavy duty welded shell body
- Maintenance-friendly, easy to exchange parts which are available upon request
[/ezcol_2third_end]
[ezcol_1third]
[/ezcol_1third] [ezcol_2third_end]
TS-R
Terrier Vertical Lifting Clamps
For lifting stainless steel sheets
Application:
- • For vertical lifting, transporting and turning of stainless steel plates and structures
- • Jaw openings available from: 0 to 55 mm
- • TSE-R / TSEU-R types are supplied with enlarged jaw opening
- • Working load limit (WLL) 750 – 7500kg. Min. WLL is 10% of max. WLL
- Note: The plate surface of the material must have a hardness level of
- max. HRC 30
Features and benefits:
- • Pivot and cam are made of stainless steel
- • Body and lock lever are nickel plated to prevent corrosion due to carbon
- contamination
- • TSU-R / TSEU-R come with articulated lifting shackle for universal lifting flexibility at various angles
- • TS-R / TSE-R come with standard lifting shackle
- • Always equipped with a safety mechanism, ensuring the clamp does not slip when
- lifting force is applied and when load is being lowered
- • Clamp is locked in closed as well as open position
- • Lightweight design for easy handling
- • Tough quality heavy duty welded shell body
- • Maintenance-friendly, easy to exchange parts which are available upon request
[/ezcol_2third_end]
